Measure[1][:Scalar][:Power:ac]? [<Expected_Value>[,<Resolution>[,<Source List>]]] - Agilent Technologies U2000 Series Manual

MEASure[1][:SCALar][:POWer:AC]?
[<expected_value>[,<resolution>[,<source list>]]]
This command sets the current window's measurement function with relative
mode off, aborts, configures the window, calculates the measurement result
and places the result on the bus.
Syntax
MEAS
1
Parameters
Refer to
parameters in this command.
U2000 Series Programming Guide
:POW
:SCAL
Space expected_value
DEF
"Optional Parameters"
Item Description/Default
expected_value A numeric value for the expected power level.
(for the expected The units of measurement are dBm and W.
power level) The default units are defined by
UNIT:POWer.
resolution A numeric value for the resolution. If
unspecified the current resolution setting is
used.
:AC ?
,
resolution
DEF
on page 67 for additional details on the
MEASurement Commands
,
source list
Range of Values
–
60 dBm to +20 dBm
1
DEF
2
1 to 4
1.0, 0.1, 0.01, 0.001
1
DEF
2
81