Rcl <Nrf - Agilent Technologies U2000 Series Manual

13 IEEE 488.2 Command Reference
*RCL <NRf>
The *RCL <NRf> (ReCaLl) command restores the state of the power sensor
from the specified save/recall register. An instrument setup must have been
stored previously in the specified register.
Syntax
Parameters
Error Message
• If the register does not contain a saved state, error –224, "Illegal parameter
304
Space
*RCL
Type Description/Default
NRf The number of the register to be recalled.
value" occurs.
NRf
Range of Values
1 - 10
U2000 Series Programming Guide