11
TRIGger Subsystem
TRIGger[:SEQuence[1]]:SOURce
BUS|EXTernal|HOLD|IMMediate
This command configures the trigger system to respond to the specified
source. This command only selects the trigger source. Use the INITiate
command to place the power sensor in the wait for trigger state.
This command has the same purpose as TRIGger[1]:SOURce
N O T E
BUS|EXTernal|HOLD|IMMediate.
Syntax
TRIG
288
:SEQ
1
Space
:SOUR
U2000 Series Programming Guide
EXT
HOLD
IMM
BUS
?