Memory:table:frequency:points - Agilent Technologies U2000 Series Manual

MEMory:TABLe:FREQuency:POINts?

This query returns the number of frequency points for the table currently
selected. The response format is <NRf>. If no frequency values have been set,
this command returns 0. If no table is selected, this command returns NAN.
Syntax
Example
MEM:TABL:FREQ:POIN?
U2000 Series Programming Guide
:TABL
MEM
:POIN
:FREQ
This command queries the number of
frequency points in the current table.
MEMory Subsystem
?
6
151