CALCulate[1]:LIMit:STATe <boolean>
This command enables/disables the test limits for the current
window/measurement.
Syntax
Example
CALC1:LIM:STAT 1
Reset Condition
On reset, limit checking is disabled.
Query
CALCulate[1]:LIMit:STATe?
The query enters 1 or 0 into the output buffer indicating the status of the
limits testing feature for the current window/measurement.
• 1 is returned when limits testing is enabled
• 0 is returned when limits testing is disabled
U2000 Series Programming Guide
:LIM
CALC
1
Space
:STAT
?
This command enables the limit checking
function for the current
window/measurement.
CALCulate Subsystem
0|OFF
1|ON
3
101