Agilent Technologies U2000 Series Manual page 188

7 SENSe Subsystem
Syntax
Example
SENS:AVER:SDET OFF
Reset Condition
On reset, step detection is enabled.
Query
SENSe[1]:AVERage:SDETect?
The query enters a 1 or 0 into the output buffer indicating the status of step
detection.
• 1 is returned when step detection is enabled
• 0 is returned when step detection is disabled
Query Example
SENS:AVER:SDET?
170
:
SENS
1
:SDET
AVER
This command disables step detection.
This command queries whether step
detection is on or off.
Space
0|OFF
1|ON
?
U2000 Series Programming Guide