Sense[1]:Detector:function <Character_Data - Agilent Technologies U2000 Series Manual

7 SENSe Subsystem
SENSe[1]:DETector:FUNCtion <character_data>
This command sets the measurement mode for U2000 Series USB power
sensors.
Syntax
SENS
Parameters
• If TRIG:SOUR is set to INT1, or EXT, it is set automatically to IMM.
• INIT:CONT is set automatically to ON.
• SENS:AVER2:STAT is set automatically to OFF.
• CALC:FEED is set automatically to "POW:AVG" for all CALC blocks using the current
190
:
1
Item Description/Default
character_data Defines the measurement mode:
•
1
When measurement mode is set to average:
measurement in their CALC:MATH:EXPR.
:
FUNC
DET
AVERage: sets the sensor to average
only mode.
Space
character_data
?
Range of Values
1
AVERage
U2000 Series Programming Guide