Memory:catalog:table - Agilent Technologies U2000 Series Manual

6 MEMory Subsystem

MEMory:CATalog:TABLe?

This command is used to list the stored frequency dependent offset tables.
The power sensor returns the data in the form of two numeric parameters and
as many strings as there are stored tables.
<numeric_value>,<numeric_value>{,<string>}
• The first numeric parameter indicates the amount of memory, in bytes,
• The second parameter indicates the memory, in bytes, available for the
• Each string parameter returned indicates the name, type and size of a
For example, a sample of a response may look like:
1178,10040,"DEFAULT,TABL,14","TABLE1,TABL,116",
"TABLE2,TABL,74","TABLE3,TABL,62"...........
There are also ten frequency dependent offset tables named CUSTOM_A
through CUSTOM_J which do not contain any data when the power sensor is
shipped from the factory.
132
used for the storage of tables.
storage of tables.
stored table:
• <string>,<type>,<size>
<string> indicates the name of the table.
•
<type> indicates TABL for a table.
•
<size> indicates the size of the table in bytes.
•
U2000 Series Programming Guide