Questionable Register Sets - Agilent Technologies U2000 Series Manual

Questionable Register Sets

The questionable register sets contain information which gives an indication
of the quality of the data produced by the power sensor. The contents of the
individual registers in these register sets may be accessed by appending the
commands listed in
The following command descriptions detail the SCPI register you require to
control but do not detail the register set commands.
The three questionable register sets are:
STATus:QUEStionable
STATus:QUEStionable:CALibration[:SUMMary]
STATus:QUEStionable:POWer[:SUMMary]
U2000 Series Programming Guide
"Status Register Set Commands"
STATus Subsystem
on page 226.
9
241