Read[1][:Scalar][:Power:ac]? [<Expected_Value>[,<Resolution>[,<Source List>]]]; Read[1][:Scalar][:Power:ac] - Agilent Technologies U2000 Series Manual

2 MEASurement Commands

READ[1][:SCALar][:POWer:AC]?

[<expected_value>[,<resolution>[,<source list>]]]
This command sets the current window's measurement function with relative
mode off, aborts then initiates the current measurement, calculates the
measurement result and places the result on the bus. The result is a power
based measurement and is expressed in the units defined by UNIT[1]:POWer.
INITiate:CONTinuous must be set to OFF, otherwise error –213, "INIT ignored"
N O T E
occurs. If TRIGger:SOURce is set to BUS, error –214, "Trigger deadlock" occurs.
Syntax
READ
1
Parameters
Refer to
parameters in this command.
78
:SCAL :POW
expected_value
Space
DEF
"Optional Parameters"
Item Description/Default
expected_value The expected power level parameter can be
set to DEF or a numeric value. If a value is
(for the expected
power level) entered it should correspond to that set by
CONFigure otherwise an error occurs.
:AC ?
,
resolution
DEF
on page 67 for additional details on the
,
source list
Range of Values
–
60 dBm to +20 dBm
1
DEF
U2000 Series Programming Guide