Memory:clear:table - Agilent Technologies U2000 Series Manual

MEMory:CLEar:TABle

This command is used to clear the contents of the table currently selected
using MEMory:TABLe:SELect. Although the table remains, a
MEMory:TABLe:FREQuency|GAIN:POINts? query returns a 0 as the table
contents are empty.
This command is an alternative form of the MEMory:CLEar[:NAME] command.
The difference is the method in which the table is selected.
The contents cleared using this command are non-recoverable.
N O T E
Syntax
Example
MEM:CLE:TABL
Error Message
If no table is selected, error –221, "Settings conflict" occurs.
U2000 Series Programming Guide
MEM :CLE :TABL
This command clears the contents of the
currently selected table.
MEMory Subsystem
137
6