9
STATus Subsystem
Parameters
Query
:ENABle?
The query returns a 15 bit decimal- weighted number representing the
contents of the Enable Register of the SCPI Register Set being queried. The
format of the return is <NR1> in the range of 0 to 32767 (2
:NTRansition <NRf>|<non-decimal numeric>
This command sets the Negative Transition Register of the SCPI Register Set
you require to control. The parameter value, when rounded to an integer and
expressed in base 2 has its first 15 bits written into the Negative Transition
Register of the SCPI Register Set concerned. The last bit (bit 15) is always set
to 0.
228
Type
NRf
non-decimal numeric
Description
The value used to set the
Enable Register.
U2000 Series Programming Guide
Range of Values
16
0 to 2
–1
15
–1).