SERVice:SENSor[1]:CDUEdate <"date">
This command is used to enter the calibration due date.
Syntax
Example
SERV:SENS1:CDUEdate
"2006,09,21"
Query
SERVice:SENSor[1]:CDUEdate?
This query returns the calibration due date in U2000 Series USB power
sensors. Calibration due date information is stored in the sensor's non-
volatile memory.
Query Example
SERV:SENS1:CDUEdate?
U2000 Series Programming Guide
SERV
:SENS
Space
1
:CDUE
This command enters the calibration due
date of the U2000 Series USB Power
Sensor as 21st September 2006.
This query returns the calibration due
date of the U2000 Series USB Power
Sensor.
SERVice Subsystem
"date"
?
8
208