[Sense[1]]:Correction:gain2 Commands - Agilent Technologies U2000 Series Manual

7 SENSe Subsystem

[SENSe[1]]:CORRection:GAIN2 Commands

These commands provide a simple correction to a measurement for an
external gain/loss.
The following commands are detailed in this section:
[SENSe[1]]:CORRection:GAIN2:STATe <boolean>
[SENSe[1]]:CORRection:GAIN2[:INPut][:MAGNitude] <numeric_value>
184 U2000 Series Programming Guide