Trigger[:Sequence[1]]:Immediate - Agilent Technologies U2000 Series Manual

TRIGger[:SEQuence[1]]:IMMediate

This command provides a one time over- ride of the normal process of the
downward path through the wait for trigger state. It causes the immediate exit
of the event detection layer if the trigger system is in this layer when the
command is received. In other words, the instrument stops waiting for a
trigger and takes a measurement ignoring any delay set by TRIG:DELay.
Syntax
Example
TRIG:SEQ:IMM
U2000 Series Programming Guide
TRIG :SEQ 1
:IMM
This command initiates a measurement
on the sensor.
TRIGger Subsystem
287
11