8
SERVice Subsystem
SERVice:SENSor[1]:FREQuency:MAXimum?
This query returns the maximum frequency that can be measured in MHz unit
by the currently connected sensor. It is applicable to U2000 Series USB power
sensors only. Maximum frequency information is stored in the sensor's
non- volatile memory.
Syntax
Example
SERV:SENS1:FREQ:MAX?
Error Messages
• If the sensor, currently connected, does not contain the necessary
211
SERV
:SENS
information in non- volatile memory, error –241 "Hardware missing"
occurs.
1
:FREQ
:MAX
This query returns the maximum
frequency that can be measured by the
U2000 Series USB Power Sensor
currently.
?
U2000 Series Programming Guide