Trigger[:Sequence[1]]:Count <Numeric_Value; Trigger['Equence[1]]:Count <Numeric_Value - Agilent Technologies U2000 Series Manual

TRIGger[:SEQuence[1]]:COUNt <numeric_value>
This command controls the path of the trigger subsystem in the upward
traverse of the wait for trigger state. COUNt loops through the event
detection/measurement cycle are performed. That is, COUNt measurements
are performed in response to COUNt trigger events.
COUNt can be set to a value >1 only when:
• [SENSe[1]]:MRATe <character_data> is set to FAST
and
• TRIGger:SOURce set to IMMediate or HOLD.
Syntax
TRIG
Parameters
U2000 Series Programming Guide
:SEQ
Item Description/Default
numeric_value The number of triggered events for the
measurement cycle.
•
1
:COUN
DEF: the default value is 1
TRIGger Subsystem
numeric_value
Space
DEF
?
Range of Values
1 to 50
DEF
11
283