Status:operation:ulfail[:Summary] - Agilent Technologies U2000 Series Manual

STATus:OPERation:ULFail[:SUMMary]

The operation status upper limit fail summary register set contains
information on the upper limit fail status of the power sensor.
The following bits in these registers are used by the power sensor:
The appropriate bits are set if a channel upper limit test fails or a window
upper limit test fails.
These bits are cleared if a measurement is made and the test is enabled and
passes.
Syntax
U2000 Series Programming Guide
Bit Decimal
Number Weight
0 -
1 2
2 4
3 8
4 16
5 32
6 64
7-15 -
STAT :OPER
Definition
Not used
Current window ULFail Status
Not used
Not used
Not used
Not used
Not used
Not used
:ULF :SUMM
STATus Subsystem
239
9