Calculate[1]:Feed[1]<String - Agilent Technologies U2000 Series Manual

3 CALCulate Subsystem
CALCulate[1]:FEED[1]<string>
This command sets the input measurement mode to be fed to the specified
input on the CALC block. It is applied to the measurement after the
CALC:MATH:EXPR command has been used to specify which measurement the
feed is taken from.
Under certain circumstances the measurement mode is changed by the
CALC:MATH:EXPR command. Refer to
<string>"
Syntax
86
on page 104 for further information.
CAL
1
:FEED
"CALCulate[1]:MATH[:EXPRession]
Space
string
1
?
U2000 Series Programming Guide