SYSTem:PRESet <character_data>
This command presets the power sensor to values appropriate for measuring
the communications format specified by <character_data>. The power sensor
is preset to default values if no value or the value DEFault is supplied.
DEFault settings apply to both *RST and to
N O T E
SYSTem:PREset DEFault unless stated otherwise.
Syntax
SYST
Parameters
Example
SYST:PRES DEF
U2000 Series Programming Guide
Space
:PRES
Item
Description
character_data
A communications format which determines
the preset values.
character_data
This command presets the power sensor
with default values. The same default
values are set when the parameter is
omitted.
SYSTem Subsystem
Range of Values
DEFault
257
10