Figure 1-4 Limits Checking Results; Setting Measurement Limits; Setting Limits - Agilent Technologies U2000 Series Manual

1 Power Sensor Remote Operation

Setting Measurement Limits

You can configure the power sensor to detect when a measurement is outside
of a predefined upper and/or lower limit value.
Limits are measurement display line based and can be applied to power
measurement.

Setting Limits

The power sensor can be configured to verify the power being measured
against an upper and/or lower limit value. The range of values that can be set
for lower and upper limits is –150.00 dBm to +230.00 dBm. The default upper
limit is +90.00 dBm and the default lower limit is –90.00 dBm.
+10 dBm
+4 dBm

Figure 1-4 Limits Checking Results

28
Amplitude
o
o
o
Fail
o
o
o
o
Fail
Frequency
U2000 Series Programming Guide