Sense[1]:Average[:State] <Boolean; Sense[1]:Average['Tate] <Boolean - Agilent Technologies U2000 Series Manual

7 SENSe Subsystem
SENSe[1]:AVERage[:STATe] <boolean>
This command is used to enable and disable averaging.
Syntax
Example
AVER 1
Reset Condition
On reset, averaging is OFF.
Query
SENSe[1]:AVERage[:STATe]?
The query enters a 1 or 0 into the output buffer indicating the status of
averaging.
• 1 is returned when averaging is enabled
• 0 is returned when averaging is disabled
171
:
SENS
1
:STAT
AVER
This command enables averaging on
power sensor.
Space
0|OFF
1|ON
?
U2000 Series Programming Guide