Calibration[1]:Zero:type <External|Internal; Calibration[1]:Zero0Ype <External|Internal - Agilent Technologies U2000 Series Manual

4 CALibration Subsystem
CALibration[1]:ZERO:TYPE <EXTernal|INTernal>
This command is used to configure the power sensor either for enternal
zeroing or internal zeroing.
Syntax
CAL
Example
CAL:ZERO:TYPE EXT
Reset Condition
On reset, the zeroing type will not be affected.
116
1 :ZERO
:TYPE
Space
This command changes the type of zeroing
to external.
U2000 Series Programming Guide
EXT
INT
?