Trigger[1][:Immediate] - Agilent Technologies U2000 Series Manual

TRIGger[1][:IMMediate]

This command causes a trigger to occur immediately, provided the sensor is in
the wait for trigger state. When this command is executed, the measurement
result is stored in the power sensor's memory. Use FETCh? to place the
measurement result in the output buffer.
This command performs the same function as INITiate[1]:[IMMediate].
N O T E
Syntax
Example
TRIG
Error Messages
If the power sensor is not in the wait for trigger state, then
TRIGger:IMMediate causes error –211, "Trigger ignored".
U2000 Series Programming Guide
TRIG 1
:IMM
This command causes a sensor trigger to
occur immediately.
TRIGger Subsystem
277
11