Operation Register Sets - Agilent Technologies U2000 Series Manual

9 STATus Subsystem

Operation Register Sets

The following registers contain information which is part of the power
sensor's normal operation. The contents of the individual registers of these
register sets may be accessed by appending the commands listed in
Register Set Commands"
The following command descriptions detail the SCPI register you require to
control but do not detail the Register Set commands.
The seven Operation Register Sets are:
STATUS:OPERation
STATus:OPERation:CALibrating[:SUMMary]
STATus:OPERation:LLFail[:SUMMary]
STATus:OPERation:MEASuring[:SUMMary]
STATus:OPERation:SENSe[:SUMMary]
STATus:OPERation:TRIGger[:SUMMary]
STATus:OPERation:ULFail[:SUMMary]
Further information on these register sets is provided on the following pages.
232
on page 226.
"Status
U2000 Series Programming Guide