8
SERVice Subsystem
SERVice:SENSor[1]:CPLace <"place">
This query is used to enter the calibration place.
Syntax
SERV
Example
SERV:SENS1:CPL
"Agil-Penang"
Query
SERVice:SENSor[1]:CPLace?
This query returns the calibration place in U2000 Series USB power sensors.
Calibration place information is stored in the sensor's non- volatile memory.
Query example
SERV:SENS1:CPL?
209
:SENS
1
Space
:CPL
This command enters the place of
calibration of the U2000 Series USB power
sensor as Agilent Penang.
This query returns the place of
calibration of the U2000 Series USB Power
Sensor.
U2000 Series Programming Guide
"place"
?