Sense[1]:Power:ac:range <Numeric_Value - Agilent Technologies U2000 Series Manual

7 SENSe Subsystem
SENSe[1]:POWer:AC:RANGe <numeric_value>
Its purpose is to select one of two power ranges.
• If 0 is selected, the power sensor's lower range is selected
• If 1 is selected, the power sensor's upper range is selected
Setting a range with this command automatically switches
SENSe[1]:POWer:AC:RANGe:AUTO to OFF.
Syntax
SENS
Example
POW:AC:RANG 0
Reset Condition
On reset, the upper range is selected.
Query
SENSe[1]:POWer:AC:RANGe?
The query enters a 1 or 0 into the output buffer indicating the status of the
power sensor's range.
198
:
POW
1
Space
:RANG
:AC
This command sets the power sensor to
it's lower range.
U2000 Series Programming Guide
numeric_value
?