Device Status Register Sets - Agilent Technologies U2000 Series Manual

Device Status Register Sets

The status registers contain information which give device status information.
The contents of the individual registers of these register sets may be accessed
by appending the commands listed in
page 226.
The following command descriptions detail the SCPI register you require to
control but do not detail the register set commands.
The one device status register set is:
STATus:DEVice:
The following bits in these registers are used by the power sensor:
The power sensor error bits (3) are set to:
• 1, if the U2000 Series USB power sensor's non- volatile memory has failed.
• 0, for every other condition.
U2000 Series Programming Guide
Bit Number Decimal
Weight
0 -
1 2
2 4
3 8
4 16
7-15 -
14 16384
15 -
"Status Register Set Commands"
Definition
Not used
Not used
Not used
Power sensor error
Not used
Not used
Not used
Bit 15 always 0
STATus Subsystem
on
231
9