Agilent Technologies U2000 Series Manual page 200

7 SENSe Subsystem
• 1 is returned when the pulse power measurement feature is enabled.
• 0 is returned when the pulse power measurement feature is disabled.
Query Example
CORR:GAIN3:STAT?
Error Messages
• If [SENSe[1]]:CORRection:DCYCle:STATus is set to ON while
182
[SENSe[1]]:SPEed is set to 200, the error –221, "Settings Conflict"
occurs.
This command queries whether the pulse
measurement feature is on or off.
U2000 Series Programming Guide