Initiate[1][:Immediate] - Agilent Technologies U2000 Series Manual

INITiate[1][:IMMediate]

This command sets the power sensor in the wait for trigger state. When a
trigger is received, the measurement is taken and the result placed in the
power sensor memory. If TRIGger:SOURce is set to IMMediate the
measurement begins as soon as INITiate:IMMediate is executed.
Use FETCh? to transfer a measurement from memory to the output buffer.
Refer to
This command performs the same function as
N O T E
INITiate:[IMMediate]:SEQuence[1].
Syntax
Example
INIT1:IMM
Error Messages
If the power sensor is not in the idle state or INITiate:CONTinuous is ON,
error –213, "INIT ignored" occurs.
U2000 Series Programming Guide
"FETCh[1]?"
INIT
1
on page 74 for further details.
:IMM
This command places the sensor in the
wait for trigger state.
TRIGger Subsystem
267
11