[Sense[1]]:Correction:dcycle|Gain3:State <Boolean; Sense[1]]:Correction:dcycle|Gain3'Tate <Boolean - Agilent Technologies U2000 Series Manual

7 SENSe Subsystem
[SENSe[1]]:CORRection:DCYCle|GAIN3:STATe <boolean>
This command is used to enable and disable the pulse power measurement
feature.
The [SENSe[1]]:CORRection:DCYCle|GAIN3 command should be used to
enter the duty cycle of the signal you want to measure.
Syntax
SENS
Example
CORR:DCYC:STAT 1
Reset Condition
On reset, the pulse power measurement feature is disabled.
Query
[SENSe[1]]:CORRection:DCYCle|GAIN3:STATe?
The query enters a 1 or 0 into the output buffer indicating the status of the
pulse power measurement feature.
181
: CORR
1
:DCYC
:STAT
:GAIN3
This command enables the pulse
measurement feature.
U2000 Series Programming Guide
Space
0|OFF
1|ON
?