8
SERVice Subsystem
SERVice:SENSor[1]:SNUMber <"serial_number">
This command is used to enter the serial number of U2000 Series USB power
sensors.
Syntax
SERV
Example
SERV:SENS1:SNUM MY12345678 This command enters the serial number
Query
SERVice:SENSor[1]:SNUMber?
This query returns the serial number for U2000 Series USB power sensors.
Serial number information is stored in the sensor's non- volatile memory.
Query Example
SERV:SENS1:SNUM?
217
:SENS
1
:SNUM
Space
"serial_number"
?
and the changes of serial number will
take effect after power recycle.
This query returns the serial number of
the U2000 Series USB Power Sensor.
U2000 Series Programming Guide