Sense[1]:Correction:cset[2][:Select] <String; Sense[1]:Correction:cset[2]['Elect] <String - Agilent Technologies U2000 Series Manual

7 SENSe Subsystem
SENSe[1]:CORRection:CSET[2][:SELect] <string>
This command enters the name of the sensor frequency dependent offset table
which is to be used.
If SENSe[1]:CORRection:CSET2:STATe is set to OFF, the selected sensor frequency
N O T E
offset table is not being used.
Syntax
SENS
1
Parameters
174
:
CORR
Item Description/Default
string String data representing a sensor
frequency dependent offset table name.
:CSET2
1
Space
:SEL
?
Range of Values
Any existing table name
(Existing table names
can be listed using
MEMory:CATalog:TABle?).
U2000 Series Programming Guide
string