11
TRIGger Subsystem
TRIGger[1]:SOURce BUS|EXTernal|HOLD|IMMediate
This command configures the trigger system to respond to the specified
source. This command only selects the trigger source. Use the INITiate
command to place the power sensor in the wait for trigger state.
This command has been included for compatibility purposes. It has the same purpose as
N O T E
TRIGger[:SEQuence[1]]:SOURce BUS|EXTernal|HOLD|IMMediate which
should be used in preference.
Syntax
278
TRIG
:SOUR
1
Space
EXT
HOLD
IMM
BUS
?
U2000 Series Programming Guide