Table 9-1 Commands And Events Affecting Status Register; Status Subsystem - Agilent Technologies U2000 Series Manual

9

STATus Subsystem

STATus Subsystem
The STATus command subsystem enables you to examine the status of the
power sensor by monitoring the following status registers:
• Device status register
• Operation status register
• Questionable status register
The contents of these and other registers in the power sensor are determined
by one or more status registers.
Table 9- 1
status registers:

Table 9-1 Commands and events affecting Status Register

Status Register
SCPI Transition Filters (NTR and PTR registers)
SCPI Enable Registers
SCPI Event Registers
SCPI Error/Event Queue enable
SCPI Error/Event Queue
IEEE488.2 Registers ESE SRE
IEEE488.2 Registers SESR STB
The contents of the status registers are examined using the following status
register set commands:
:CONDition?
:ENABle <NRf>|<non-decimal numeric>
[:EVENt?]
:NTRansition <NRf>|<non-decimal numeric>
:PTRansition <NRf>|<non-decimal numeric>
Each of these can be used to examine any of the following eleven status
registers:
224
summarizes the effects of various commands and events on these
*RST *CLS Power On
none none preset
none none preset
none clear clear
none none preset
none clear clear
none none clear
none clear clear
U2000 Series Programming Guide
STATus:
PRESet
preset
preset
none
preset
none
none
none