Calibration[1][:All] - Agilent Technologies U2000 Series Manual

CALibration[1][:ALL]

This command is identical to CALibration[1][:ALL]?, however, unlike the query it
N O T E
does not provide a response to indicate whether the calibration has been successful or not.
This command causes the power sensor to perform a zeroing sequence. The
zeroing sequence consists of:
1 Zeroing the power sensor (CALibration:ZERO:AUTO ONCE or
Syntax
Example
CAL1:ALL
Error Messages
• If zeroing was not carried out successfully the error –231, "Data
U2000 Series Programming Guide
CALibration:AUTO ONCE).
CAL
1
Questionable; ZERO ERROR" occurs.
:ALL
This command causes the power sensor to
perform a zeroing sequence.
CALibration Subsystem 4
109