7
SENSe Subsystem
SENSe[1]:TEMPerature?
This this command to returns the power sensor's temperature in degrees
Celsius.
Syntax
Parameters
Example
SENS1:TEMP?
Reset Condition
On reset, this parameter is not affected.
Error Messages
• If a U2000 Series USB Power Sensor is not connected, error –241,
202
SENS
:
1
Item
Description/Default
numeric_value
A numeric value defining sensor's temperature
in degrees Celsius.
"Hardware missing" occurs.
: TEMP
?
This command returns the current sensor
temperature.
Range of Values
–50 to 100
U2000 Series Programming Guide