Time Management; Time - Supermicro SSH-C48Q User Manual

SSH-C48Q Switch CLI User's Guide

Time Management

Commands in this category are used for retrieving
and setting the current system time, setting the
time zone, and setting daylight saving time
parameters.

time

Configures the time on the device.
time [-S ipaddr] [-T hhmmss[mmddyyyy]]
-S ipaddr
Sets the NTP Server IP address.
-T hhmmss[mmddyyyy]
Sets the local clock time hour, minutes, and seconds. Optionally, the
month, day, and year can be set.
-> time
09:52:12 10/16/2015
Configured to use the local clock
-> time -S 172.26.0.254
Configured the NTP server ip address successfully
13:53:02 10/16/2015
Configured to use NTP server IP address:
172.26.0.254
Time is configured locally (using a local clock)
or is set to be updated by an NTP server. If you
set the time locally, the unit unconfigures the
NTP server IP address if set.
186