Disabling Upload Failure Data Capture; Purging Upload Failure Data Capture Files; Configuring The Upload Failure Data Capture Ftp Server - Brocade Communications Systems Brocade 8/12c User Manual

31
Upload failure data capture

Disabling upload failure data capture

NOTE
Upload Failure Data Capture is only supported on Fabric OS devices.
1. Select Monitor > Technical Support > Upload Failure Data Capture.
2. Select one or more devices on which you want to disable automatic trace dump from the
3. Click the left arrow button.
4. Click OK on the Upload Failure Data Capture dialog box.
5. Click OK on the confirmation message, if necessary.

Purging upload failure data capture files

NOTE
Upload Failure Data Capture is only supported on Fabric OS devices.
1. Select Monitor > Technical Support > Upload Failure Data Capture.
2. Select the Purge Upload Failure Data Capture Files check box to enable purging the trace
3. Select how often (days) you want to purge the trace dump data from the Purge Upload Failure
4. Click OK on the Upload Failure Data Capture dialog box.

Configuring the upload failure data capture FTP server

NOTE
Upload Failure Data Capture is only supported on Fabric OS devices.
NOTE
Some external FTP software (such as, Filezilla and Xlight) are not supported.
1. Select Monitor > Technical Support > Upload Failure Data Capture.
2. Select a device from the Available Switches with Upload Failure Data Capture Enabled table.
3. Click Change FTP Host.
920
The Upload Failure Data Capture dialog box displays.
Available Switches with Upload Failure Data Capture Enabled table.
The selected devices move from the Switches with Upload Failure Data Capture Enabled table
to the Available Switches with Upload Failure Data Capture Disabled table.
The Upload Failure Data Capture dialog box displays.
dump files.
Data Capture Files list.
The Upload Failure Data Capture dialog box displays.
The Change FTP Server dialog box displays.
Brocade Network Advisor SAN User Manual
53-1002167-01