Changing the switch name
Switches can be identified by IP address, domain ID, World Wide Name (WWN), or switch names.
Names must begin with an alphabetic character, but otherwise can consist of alphanumeric,
hyphen, and underscore characters. The maximum number of characters is 30, unless FICON
mode is enabled. When FICON mode is enabled, the maximum number of characters is 24.
NOTE
Some system messages identify a switch service by the chassis name. If you assign meaningful
chassis names and switch names, system logs are easier to use.
1. Open the Switch Administration window as described in
2. Select the Switch tab.
3. Enter a new name in the Name field and click Apply.
Changing the switch domain ID
Although domain IDs are assigned dynamically when a switch is enabled, you can request a
specific ID to resolve a domain ID conflict when you merge fabrics.
Use the following procedure to change the switch domain ID.
1. Open the Switch Administration window as described in
2. Disable the switch, as described in
3. Select the Switch tab.
4. Enter a new domain ID in the Domain ID field.
5. Click Apply.
6. Enable the switch, as described in
Viewing and printing a switch report
The switch report includes the following information:
•
•
•
•
•
•
Perform the following steps to view or print a report.
Web Tools Administrator's Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
window"
on page 35.
window"
on page 35.
The domain ID range depends on the switch interop mode:
•
For IM0, the range is between 1 and 239.
•
For IM2, it depends on the selected offset value.
•
For IM3, it depends on the selected offset value.
A list of switches in the fabric
Switch configuration parameters
A list of ISLs and ports
Name Server information
Zoning information
SFP serial ID information
"Opening the Switch Administration
"Opening the Switch Administration
"Enabling and disabling a switch"
"Enabling and disabling a switch"
Switch configuration
on page 40.
on page 40.
3
41