Chapter 6 Making The Initial System Settings; Setting The Password Policy - Fujitsu ORACLE M10-1 Installation Manual

Chapter 6
Making the Initial System Settings
This chapter describes the initial settings that must be implemented before system
startup.
For details on the XSCF commands executed in each step, see the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 XSCF Reference Manual.

Setting the Password Policy

■
Setting a User Account and Password
■
Configuring the Telnet/SSH Service
■
Configuring the HTTPS Service
■
Configuring the XSCF Network
■
Configuring Memory Mirroring
■
Creating a Physical Partition Configuration List (PCL)
■
Confirming That a System Board (PSB) is Assigned to a Physical Partition (PPAR)
■
Setting a CPU Operational Mode for the Physical Partition
■
Synchronizing the Physical Partition (PPAR) Time and XSCF Time
■
Registering a CPU Activation Key
■
Assigning CPU Core Resources to a Physical Partition
■
Starting and Stopping a Physical Partition (PPAR)
■
Saving Configuration Information
■
6.1 Setting the Password Policy
Passwords have limitations such as length and character type. Those password
attributes conform to rules called the password policy.
The current password policy applies to every user account that is created. For this
reason, check the current password policy, and adjust the password policy as needed
before creating any user account.
89