[PrjFile]
Count=1
FILE-0=Template.prj
ActivePrj=Template.prj
[SubPrj-Template.prj]
Like in the Prj-File, you have to set your correct project folder path in the "WSP=" line:
[DirInfo]
WSP=C:\Fujitsu\Sample\96340\template\
Now save and close the file also as a normal text file.
The new project environment is now adjusted.
1.3 Adjusting Linker Settings
Note that especially the Linker settings in the category "Disposition/Connection" have to be
adjusted device specifically.
In the chapter 6.3 is a list of all settings for the MB96F348 device.
Please adjust RAM- and ROM-settings if you use a different device.
1.4 MCU change
In the project settings the MCU type can be adjusted:
Doing so, a dialog box will occur:
MCU-AN-300217-E-V10
MB2198 – Getting Started
Chapter 1 Getting Started
FILE-0=Led.prj
ActivePrj=Led.prj
[SubPrj-Led.prj]
- 8 -
© Fujitsu Microelectronics Europe GmbH