Detailed Settings; Nand / Nor Boot Option; Dip Switches - Fujitsu SK-86R12-CPU01 User Manual

3 Detailed Settings

3.1 NAND / NOR Boot Option

For NAND/NOR Boot Option SW1 is used
NAND SELFL = HIGH Boot from NAND
NOR SEFLL = LOW
3.2

DIP Switches

SW11 – PLL Mode
SW11 Signal
1 CRIPM0
2 CRIPM1
3 CRIPM2
4 CRIPM3
5 PLLBYPASS
6 PSMODE
7 VINITHI
8 -
Notes:
CRIPM[0:3] default settings results in 533 MHz clock frequency
FSEUGCC-UM_MB86R12-CPU01_Rev1.1
Emerald-P CPU Module
SK-86R12-CPU01
Boot from onboard NOR (default)
Description
ON = 0, OFF = 1
ON = 0, OFF = 1
ON = 0, OFF = 1
ON = 0, OFF = 1
ON = PLL Clock is bypassed
OFF = PLL Clock is not bypassed
OFF = PLL clock frequency divider ratio = 0
ON = PLL clock frequency divider ratio = 1
ON = Exception Vectors located at 0xFFFF0000
OFF = Exception Vectors located at 0x00000000
Unused
- 8 -
Default
ON
ON
ON
ON
OFF
OFF
OFF
OFF
© Fujitsu Semiconductor Europe GmbH