Qos Settings For A Voip Vlan - Extreme Networks EPICenter Software Installation Manual

Voice over IP Manager

QoS Settings for a VoIP VLAN

For each Voice over IP VLAN, you can specify the compressions algorithm and QoS profile settings that
should be used for the VLAN. In addition, you can indicate which of the ports within the VLAN are the
egress ports for the VoIP traffic.
To manipulate the settings for a VoIP VLAN, do the following:
1 Select the QoS Settings tab in the main VoIP window.
2 Select one of the VoIP VLANs from the Component Tree at the left hand side of the window.
The QoS Settings for the selected VLAN are displayed, as shown in Figure 197.
Figure 197: QoS Settings page for a VoIP VLAN
The top portion of the QoS Settings page shows the current QoS settings for each switch in the VLAN.
If you configure new settings using the Configure VoIP QoS Parameters dialog, the settings shown in
this part of the display may change to reflect the new settings.
The bottom portion of the QoS Settings page shows the default configuration attributes (compression
algorithm, priority and QoS profile) for the selected VLAN. It also displays all the ports that are
members of the VLAN, including the ports you have selected as egress ports. You can use these lists to
indicate which ports in the VLAN are the egress ports.
400 EPICenter Software Installation and User Guide