Show Inline-Power - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

show inline-power

show inline-power
Description
Displays inline power information for the specified stand-alone PoE switches.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
On stand-alone PoE switches, the output indicates the following inline power status information:
Inline power status—The status of inline power. The status conditions are:
●
Enabled
■
Disabled
■
Power usage threshold
●
Firmware status—The operational status of the slot. The status conditions are:
●
Operational
■
Not operational
■
Disabled
■
Subsystem failure
■
Measured power—The amount of power, in watts, that currently being used by the switch.
●
Legacy—The status of the legacy mode, which allows detection of many non-standard PDs.
●
Example
The following command displays inline power information for the Summit X450e-24p switch:
show inline-power
Following is sample output from this command:
Inline Power System Information
Configured
Power Usage Threshold
Disconnect Precedence
Budgeted
Firmware Status Power (Watts)
Operational 405 W
ExtremeWare XOS 11.5 Command Reference Guide
: Enabled
: 70 percent
: deny-port
Measured
Power (Watts)
0 W
Legacy
Disabled
show inline-power
541