Show Radius - Cisco Small Business 200 Series User Manual

Security
RADIUS
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command

show radius

servers
show radius
Use this command to display the values configured for the global parameters of
the RADIUS client.
show radius
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(switch) #show radius
Number of Configured Authentication Servers.... 1
Number of Retransmits.......................... 3
Timeout Duration............................... 3
Dead Time...................................... 0
RADIUS Attribute 4 Mode........................ Disable
RADIUS Attribute 4 Value....................... 0.0.0.0
Number of
Configured
Authentication
Servers
Number of
Retransmits
Time Duration
Dead Time
RADIUS
Attribute 4
Mode
Description
Displays summary data and details on RADIUS servers.
The number of RADIUS Authentication servers that have
been configured.
The configured value of the maximum number of times a
request packet is retransmitted.
The configured timeout value, in seconds, for request re-
transmissions.
The length of time an unavailable RADIUS server is skipped.
A global parameter to indicate whether the NAS-IP-Address
attribute has been enabled to use in RADIUS requests.
8
336