Show Radius-Servers - Cisco Sx350 Cli Manual

RADIUS Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
no radius-server deadtime
Parameters
•
deadtime
—Specifies the time interval in minutes during which a RADIUS
server is skipped over by transaction requests. (Range: 0–2000).
Default Configuration
The default deadtime interval is 0.
Command Mode
Global Configuration mode
Example
The following example sets all RADIUS server deadtimes to 10 minutes.
switchxxxxxx(config)#

48.8 show radius-servers

Use the show radius-servers Privileged EXEC mode command to display the
RADIUS server settings.
Syntax
show radius-servers
Command Mode
Privileged EXEC mode
Example
The following example displays RADIUS server settings:
switchxxxxxx#
show radius-servers
IP address Port Port Time
Auth Acc
---------- ---- ---- ----
radius-server deadtime
Dead
Out Retransmision time
------------- ------ -------- -----
10
Priority Usage
48
972