Debug Ipv6 Pimdm - Dell N1100-ON Reference Manual

information such as source address, destination address, control packet type,
packet length, and the interface on which the packet is received or
transmitted is displayed on the console. Use the "no" form of this command
to disable MLD tracing.
Syntax
debug ipv6 mld packet [receive | transmit]
no debug ipv6 mld packet [receive | transmit]
Default Configuration
Display of MLD traces is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug ipv6 mld packet

debug ipv6 pimdm

Use the debug ipv6 pimdm command to trace PIMDMv6 packet reception
and transmission. The receive option traces only received PIMDMv6 packets
and the transmit option traces only transmitted PIMDMv6 packets. When
neither keyword is used in the command, then all PIMDMv6 packet traces are
dumped. Vital information such as source address, destination address,
control packet type, packet length, and the interface on which the packet is
received or transmitted is displayed on the console. Use the "no" form of this
command to disable PIMDMv6 tracing.
Syntax
debug ipv6 pimdm packet [receive | transmit]
2048
Switch Management Commands