Limiting Data Presented In A Schedule - Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual

If you change the door swing after you place the door, this will not automatically be reflected in the schedule.
The schedule retains the data of the initial door placement. Therefore the particular door opening for door
56, always (by default) leads from the hall to the bedroom regardless of the door swing. If you want door
56 to lead from the bedroom to the hall, you can change the door swing in plan view, and then edit the
appropriate field in the door schedule.
To include room information in a door schedule:
1 If you need to include room information in an existing door schedule, do the following:
a Open the door schedule.
b Right-click in the schedule and click View Properties.
c In the Instance Properties dialog, click Edit for the Fields parameter.
If you are creating a new door schedule, do the following:
a Click View tab
b In the New Schedule dialog, select Doors as the category, and click OK.
2 On the Fields tab, click From Room or To Room from the Select available fields from list.
The Available fields lists updates to show all the available parameters for a room, prefixed by
either To Room or From Room.
3 Select the appropriate fields, and click OK.
The door schedule opens. Because To Room and From Room fields do not automatically reflect changes you
make to the door swing, after you place the door, you can edit these fields by selecting a value from the list.

Limiting Data Presented in a Schedule

On the Filter tab of the Schedule Properties dialog, you can create filters that limit the display of data in a
schedule. You can create up to 4 filters, and all filters must be satisfied for the data to display. See
Views on page 172.
Create panel Schedules drop-down Schedules/Quantities.
Specifying Schedule Properties | 179
Schedule