Welcome To Autodesk Revit Architecture 2010; Chapter 1 Welcome To Autodesk Revit Architecture 2010; Network Deployment Installation - Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual

Welcome to Autodesk
Revit Architecture 2010
This section includes licensing information and other information pertinent to this release of Autodesk Revit

Network Deployment Installation

This procedure describes how to set up a Revit Architecture installation for deployment from a network
location. Revit users can then access the network location to run the Revit Architecture installation program
to install the software on their client systems or workstations.
NOTE Creating a network deployment does not install Revit Architecture locally. If you want to install Revit
Architecture on the computer used to create the network deployment, run the resulting client installation using
the shortcut.
Before starting this procedure, see
instructions on how to set up one or more network license servers, if you plan to use them.
To set up network deployment
1 Start the Revit Architecture installation program.
If you are installing from a Revit Architecture DVD, the installation program starts automatically
when you insert the DVD. (If you need to start it manually, navigate to the root directory of
the DVD, and double-click Setup.exe.) If you have downloaded the installation program from
the Internet, double-click the file to start it.
2 In the Installation Wizard, click Create Deployments.
3 In the Begin Deployment dialog, do the following:
a For Specify the Administrative Image location, indicate where the administrative image for
the deployment will reside. Click Browse to navigate to the desired network location.
b For Specify the new deployment name, enter a name for the shortcut to the client installation
program.
c Ensure that the correct type of operating system is selected (32-bit or 64-bit) for the
deployment.
Licensing on page 5 for information about software licensing and
1
®
Architecture.
1